Join us today!

@twincontrols , I do it in the following way:

@adexp , Hi in an Ethercat webinar they showed this image, but it is for Ethercat, for Modbus TCP/IP I don't think it can be done...

Hello, I answer to myself... A possible solution would be to pass dateandtime to string format: TYPE ST_Register :STRUCTId : DINT;Name : STRING(...

@adexp , Hello, For TwinCAT HMI, you may also need to open TCP communications for the incoming port you will be using to publish the HMI project (...

@djdhendoehei3hd , Have you seen the photo that I have given you?, with this there is no waste of time, you already have where to start and you can ...

@djdhendoehei3hd , Hello,I'll hit you with this FB, which is the one that I have developed, how to tell time, you would have to adapt it and change ...

@djdhendoehei3hd , If you don't want to have a scan cycle time error, which is normally 10 milliseconds, you can read the system time and subtract i...

@djdhendoehei3hd , Is this what you mean? Is there something similar in TwinCAT?

@djdhendoehei3hd , Can you give an example or a link of what you want?...

@rruiter , 🤩 😍

Hello, I have found Beckhoff Device Manager, 0x8nn6 – Free space (Bytes) but I don't know how to access it through TwinCAT... searching i found ...

Hello,I am looking in TwinCAT how to know the size that a directory occupies or the free space that is left on a hard disk,what I have found for now i...

@alex , in a realtime ethernet port (intel chipset), ethercat, ethernetip, profinet cannot coexist in the same port, since they are real-time protoc...