I have a Beckhoff C6017 IPC with an HMI server running on it. The server address is:
https://192.172.1.30:2020/

A USB Wi-Fi adapter is connected to the IPC, and a virtual WLAN access point is running on it. The host IP address of the access point is:
192.168.137.1

I can successfully connect my tablet PC to the Beckhoff WLAN access point.
However, I cannot access the HMI server via the browser by entering the address:
https://192.172.1.30:2020

How can I establish a working connection from the tablet to the HMI server?

my first post and instant not the easiest task, I think :-)
I am right now testing the LDAP Extension for the TF2000 HMI System, but I can connect the HMI Server with the Server but no chance for logging in on HMI Login.
The Username and password are verified by windows test login, but HMI is logging everytime "Wrong Login" in the Server Log File.

In my Samba Log files I cannot find any attempt to login (audit already activated in Log)

I am using a freshly installed SAMBA LDAP Service for testing, I will test it against a Windows AD too for reference.

Anyone already did something like this / LDAP Setup?

Best Regards
nobrainder-de

I am new in Beckhoff world and I dont know how to solve my probleme. I would like to know how to tranfert/backup an IPC hmi server with a broken screen in a new one. The IPC with the broken screen can be turn on and work perfectely.

Thanks

I have an usercontrol that has all the controls of my motor, and now I made an usercontrol to control the configuration of the motor. I want to create it dynamic, so the hole application runs better on the IHM. I will share how I'm doing the code and explain line by line.

novoPopUp = TcHmi.ControlFactory.createEx( // create the configuration usercontrol
        'TcHmi.Controls.System.TcHmiUserControlHost', //says its a usercontrol type
         nome +'.Config',// the name of it
        {
            'data-tchmi-target-user-control':  
            "UserControl/Popup/Motor/ucPopUpMotoresConfig.usercontrol",
            'data-tchmi-top': 15,
            'data-tchmi-left': 30,
            'data-tchmi-width': 710,
            'data-tchmi-height': 420
        }
        ,objetoTC //  the father object
	);
	
      
	var desktop = TcHmi.Controls.get('Desktop');   // show in the desktop

With this code, I can create a new usercontrol and show it. My problem now is that I want it to be inside the already created usercontrol (the objetoTC one).

Does anyone know how to do it?

Or even if it's possible to do it?

I had difficulties when working with Textblock.

Here's what I'm trying to achieve. I have roughly around 150+ (most likely will increase in future to 300+) instrument tag that I need to incorporate in my HMI. Rather than changing the text manually page by page, I plan to map it to an array of string so that if there's any changes to the tag it would be easier to change. I tried and it doesn't work. Is there any limitation with textblock? Previously tried to bind textblock to real-time data (INT) and it works.

TagNo : ARRAY OF STRING;

----------------------------------------

TagNo:='MLP-BMBA-789-001';

TagNo:='MLP-BMBA-789-002';

TagNo:='MDP-BMBA-789-003';

.

.

TagNo:='MKP-BMBA-789-150';

Regards

AdexP

I've start using the navigation bar, and so far so good. But I created a page that have all the configurations, and I want the operator not be able to see it. On the navigation structure, I tried to change the user access of an individual, but I could not make it work. Have anyone make it work?

This is how it configured now. I have a group called operacao

I am trying to build  a small application to just display some variables on a web browser using Twincat3  PLC HMI web function.

I think I followed all the steps as mentioned on inofsys but still I am not able to browse HMI. 

My target is Local and platform is TwinCAT RT x64. 

I have installed TF1800, TF1810 ,TF2000. 

Also on manual of tf1810 the 1st step is not clear to me

Step 1: Configure Internet Information Services (IIS)

The PLC HMI Web uses the Microsoft IIS as web server. The IIS has to be configured accordingly. The configuration is handled by theTF1810 | TC3 PLC HMI Web installation, which is available for download from the Beckhoff website.

Is there anything I need to do something here or just the installation is enough ? 

I tried to browse HMI at following address

https://localhost/Tc3PlcHmiWeb/Port_851/Visu/webvisu.htm

also here 

https://127.0.0.1/Tc3PlcHmiWeb/Port_851/Visu/webvisu.htm

 and I get message 

This site can’t be reached

127.0.0.1 refused to connect.

Can someone please share his experience or provide some guidelines. 

Thank you 

Has anyone experienced the issue below when trying to start the TwinCAT HMI Live-View ? 

I also can't open the Desktop.view. I get the error below: 

Thanks for the help!!!

It just does not change at all. I don't know if this has to do with the use of the combobox on a content panel instead of an actual view?

-Evan H.